THE CROSSFIRE COMPANY

Chrysler Crossfire Parts

All the parts we supply are new, we do not supply used or second hand parts

<< Previous page | 1 | 2 | 3 | 4 | next page >

You have item(s) in your basket. basket Total cost =


click to enlarge
click photo to enlarge

TRACK / TIE ROD END

Replacement track rod end for the Crossfire. Fits either the left or right side. Fits all models 2003-2008.

Code: TRA6  £19.50 each (includes VAT)

 

BALL JOINT

Replacement ball joint for the Crossfire. Fits either left or right side.
Fits all models 2003-2008  

Code: BJ3 £17.60 each (includes VAT)

 

click to enlarge
click photo to enlarge

STEERING ROD LINKAGE ASSEMBLY

Complete steering rod/inner/outer track rods assembly for the Crossfire.
Fits all models 2003-2008.

Code: SRA  £129.00 (includes VAT)

 

click to enlarge
click photo to enlarge

UPPER CONTROL ARM

Front suspension upper control arm for the Crossfire.
Fits all Crossfire models 2003-2008.

Code:UCA3 £94.50 for the LEFT side (includes VAT)

Code: UCA4 £94.50 for the RIGHT side (includes VAT)

 


click to enlarge

click photo to enlarge

REAR ANTI-ROLL/STABILIZER BAR LINK

Rear suspension anti-roll/stabilizer bar link for the Crossfire. Fits either left or right side.
Fits all models 2003-2008  

Code: BAR3 £17.60 each (includes VAT)

 

click to enlarge

click photo to enlarge

FRONT ANTI-ROLL/SWAY BAR BUSHES

Original equipment bushes for the Crossfire consisting of a set of four bushes for the front anti-roll/sway bar – two outer bushes and two inner ones.
Fits all Crossfire models 2003-2008.

Code: BS32 set of four bushes £50.85 (includes VAT)

 

click to enlarge
click photo to enlarge

STEERING IDLER ARM BUSH

Steering idler arm bush for the Crossfire.
Fits all models 2003-2008
Code: BS34  £19.75 (includes VAT)

 

click to enlarge

click photo for more pictures

REAR SUSPENSION LOWER NUCKLE BUSH

Rear suspension lower knuckle bush for the Crossfire.
Fits either left or right side, all models 2003-2008.  
Code:BS35 £27.60 each (includes VAT)

 

click to enlarge
click photo for more pictures

FRONT WHEEL BEARINGS

Timken high quality front wheel bearing set for the Crossfire. Consists of the outer bearing, inner bearing and oil seal. Fits either side.
For all Crossfires, including the SRT6 2003-2008

Code: WB12 set for one wheel £21.50 (includes VAT)

 

click to enlarge
click photo for more pictures

REAR WHEEL BEARING

High quality Timken rear wheel bearing for the Crossfire. Fits either side.
For all Crossfires, including the SRT6 2003-2008

Code: WB7 each £56.25 (includes VAT)

 

click to enlarge
click photo to enlarge

SPRINGS FOR THE CROSSFIRE

High quality springs imported from Germany for the Crossfire. These chrome vanadium springs are phosphate and epoxy powder coated to protect from corrosion. (Chrysler themselves no longer supply Crossfire springs).
Fits all models 2003-2008 including the SRT6.

Code: SPR3 Front springs, set of two  £77.25 (includes VAT)

Code: SPR4 Rear springs, set of two  £70.60 (includes VAT)

 


BRAKE PADS

Top quality Mintex Brake pads for the Crossfire. Fits all models except SRT6 2003-2008.

Code: BP5  Front set, (both sides) £38.70 (includes VAT)

Code: BP6  Rear set (both sides) £20.50 (includes VAT)

 


BRAKE DISCS

Top quality Brake discs by Mintex for the Crossfire. Set of 2. Fits all models except SRT6 2003-2008.

Code: BD5  Front set, (both sides) £79.50 (includes VAT)

Code: BD6  Rear set (both sides) £49.75 (includes VAT)

 


click to enlarge

click photo for more pictures

BRAKE CALIPER CLIP

Brake pad clips for the front and rear calipers. The kit for the rear calipers includes the retaining pins needed for the pads.
Fits all Crossfires 2003-2008 (except for SRT6 Rear).

Code: BC18 FRONT set for both calipers. £6.50 (includes VAT)

Code: BC19 REAR set for both calipers. £11.70 (includes VAT)

 


click to enlarge
click photo for more pictures

BRAKE CALIPERS

Brake calipers for the front and rear brakes on the Crossfire. Includes the mounting bracket and the caliper wire clip on the front calipers and the clip and pin on the rear.
Remanufactured by Cardone in the USA.
Fits all models 2003-2008 (except SRT6).

Code: BC20 £169.00 Front Left Caliper (includes VAT)

Code: BC21 £169.00 Front Right Caliper (includes VAT)

Code: BC22 £161.50 Rear Left Caliper (includes VAT)

Code: BC23 £161.50 Rear Right Caliper (includes VAT)

 


HANDBRAKE SHOES

Replacement handbrake shoes for the Crossfire. Set of four shoes for both sides. Fits all models 2003-2008.

Code: BS28 £24.60 for both sides (includes VAT)

 

HANDBRAKE REPAIR KIT

Crossfire handbrake repair kit.  Fits all models 2003-2008.

Code: HBK3 £19.80 (includes VAT)

 

click to enlarge

click photo for more pictures

BRAKE PIPE / HOSE ASSEMBLIES

Replacement brake pipe/hose assemblies (Raybestos professional grade) for the front and rear of the Crossfire.
Fits all models 2003-2008.

Code: BH16 Front brake hose - fits left and right £28.75 (includes VAT)

Code: BH17 Rear brake hose - fits left and right £28.80 (includes VAT)

 


click to enlarge
click photo to enlarge

VALVE / CAM COVER GASKETS

Set of two valve/cam cover gaskets for the Crossfire.
Fits all models 2003-2008

Code: GS29 £32.60 (includes VAT)

 

ENGINE UPPER SUMP GASKET

Upper sump gasket with RTV silicon sealant. Fits all Crossfire models 2003-2008

Code: GS30 £35.75 (includes VAT)

 

click to enlarge

click photo to enlarge

EXHAUST MANIFOLD GASKET SET

Six piece gasket set for the two exhaust manifolds.
Fits all Crossfire models 2003-2008.

Code GS31 £21.75 (includes VAT)

 

EXHAUST PIPE FLANGE SEAL

Exhaust pipe flange connecting seal.
Fits all Crossfire models 2003-2008.

Code GS32 £10.85 (includes VAT)

 

click to enlarge
click photo to enlarge

INLET MANIFOLD GASKETS

Set of two inlet manifold gaskets for the Crossfire.
Fits all models 2003-2008 except SRT6  

Code GS33 £14.60 (includes VAT)