THE CROSSFIRE COMPANY

Chrysler Crossfire Parts

All the parts we supply are new, we do not supply used or second hand parts.

<< Previous page | 1 | 2 | 3 | 4 | next page >

You have item(s) in your basket. basket Total cost =


click to enlarge

click photo for more pictures

BOOT LID & HATCHBACK STRUTS

Replacement boot lid and hatchback struts for the Chrysler Crossfire. Sold in pairs. Fits all models 2003-2008.

Code: BS29 for convertible boot lid £36.50 Set of two (includes VAT)

Code: BS30 for coupe hatchback £41.75 Set of two (includes VAT)

 


click to enlarge
click photo for more information

BONNET  STRUT

Original manufacturer bonnet strut for the Crossfire. This includes the push button for extending the strut, allowing the bonnet to rise up to a vertical position. (See photos). Although all Crossfires have this very useful extending strut, it is not a well- known feature. 
Fits all models 2003-2008.

Code: BS31 £69.25 (includes VAT)

 

 

click to enlarge
click photo to enlarge

HEADLAMP ACCESS PANEL

Panel in the front wheel well that allows access to the rear of the headlight.
Fits all Crossfires 2003-2008.

Code: HAP3 Left side panel £13.70 (includes VAT) OUT OF STOCK

Code: HAP4 Right side panel £13.70 (includes VAT)

 


click to enlarge

click photo for more pictures

HEADLIGHT RESTORING KIT

Like many cars, the Chrysler's headlights have polycarbonate plastic lenses. In time the protective coating on the lens wears away and the plastic eventually oxidizes, leading to discolouring at first and later turning opaque.
There is usually no need to renew the headlights as the lens surface can be polished and made clear again using a restoration kit.
After trying several kits on my own Chrysler I personally consider the 3M kit here to be the best. Full instructions are included and the only tool needed is an electric drill. It takes about thirty minutes from start to finish.
Nearly two years on, my headlights are still perfectly clear and the only maintenance I have done is to occasionally go over them with car polish.

Code: HK1 £24.50 (includesVAT)

To view video in fullscreen click the logo fullscreen at the bottom right of the video.

 

click to enlarge
click photo for more information

CONVERTIBLE TONNEAU SIDE-FLAP CABLE

The small side-flaps on the sides of the tonneau/convertible top cover are cable operated. If a side-flap does not open or close properly it will be due to a sticking cable. Unfortunately the cable needs to be replaced as simply lubricating it does not work in our experience. The sticking is caused by the thin inner cable developing a number of small kinks.
It is a straightforward, if a bit fiddly job, to replace and we supply some basic instructions together with a small bolt and locking nut to replace the tiny circlip at hinge cable end.
Fits all Roadster models 2004-2008

Code: CTC  Fits either side £102.20 (including VAT)

 

click to enlarge
click photo for more pictures

AUTOLINK AL319 FAULT DIAGNOSTICS CODE/SCAN TOOL

Engine functions on the Crossfire are electronically monitored and should a fault occur it will stored in the car’s computer as a five digit code. This latest generation code reader is very useful and easy to use, featuring a TFT colour display, LED status indicators and audible tones.

Easy to use
Simply plug it into the diagnostic socket, inside the Crossfire near the accelerator pedal, and switch on the ignition. Green, amber and red LEDs will give a status check and if any faults are found with the engine, transmission or emissions, the fault codes and fault descriptions will be displayed on the colour display.

Erase codes
Once the fault is fixed, the code reader can be used to erase the code and the engine-check light .

Live engine data
With the engine running it can display, for example, the rpm, engine temperature and sensor data - particularly useful for determining intermittent faults.

Freeze frame data
Displays a snapshot view of the various sensor values when the actual fault occurred. The AL319 is ideal for the Crossfire owner and can also be used to check virtually all makes of modern car going back to 1996 when the OBD 11 diagnostic system was first introduced.

Supports all the latest OBD II and CAN protocols.

Multi-lingual - can be switched to English, French, or Spanish (Français, Español).
12 months UK warranty.

Package contents: AL319 Code Reader with plug-in lead, user manual, computer-connect cable and CD for software updates, DTC list etc..
For all Crossfires 2003-2008..

Code: CR319 £44.50 (includes VAT)

 


click to enlarge image
click photo to enlarge

Draper TORX BIT AND HOLDER SET

A Torx bits set with holder, for use with a 3/8 sq. drive. Draper expert quality, made from silicon steel, hardened and tempered. Contents: T20, T25, T30, T4, T45, T50 x 30mm long.

Code: DR2 £7.90 (includes VAT)

 

 
<< Previous page | 1 | 2 | 3 | 4 | next page >>